Wireless Rain-Clik^TM Rain Sensors 

If the thought of running wires from a controller has kept you from adding rain sensors to your systems, now there’s a hassle-free alternative.  The Hunter Wireless Rain-Clik attaches quickly and easily and delivers a dependable way to ensure that your landscape isn’t getting water when it doesn’t need it.  Simply install the receiver unit next to your irrigation controller, then install the transmitter anywhere that the device can receive representative rainfall.  No ladders needed

to attach to a high outcropping on a building, no messy wires to hide our of view. What could be more simple?  What also sets a Hunter Wireless Rain-Clik apart are features no other rain-sensing device offers.  The unique Quick Response^TM feature allows the product to shut off immediately when it starts to rain.  And, unlike its competition, Hunter’s sophisticated sensing mechanism cannot be fouled by debris, giving the Wireless Rain-Clik the most highly accurate operation.

Hassle-free, wire-free easy installation

Simple to add on to a new or existing installation

Hunter’s unique Quick Response Feature

No need for water to accumulate for shut off

Modular mounting options

Variety of choices depending on the job site; gutter or wall mounts

Set a maximum dry-out period

Adjust the irrigation re-start to account for varying amounts of rain

Operates up to 90 meters from the receiver unit

Typical wired system limitations vanish

Maintenance-free patented sensing mechanism

No callbacks – just set it and forget it

Built-in bypass switch on receiver panel

Adds flexibility to the system

Retrofit with ease

Installs on any system in minutes, no stringing of wiring

Models

Wireless Rain-Clik^TM

Dimensions

8.5 cm diameter x 10cm high

Operating Specifications

·         Wiring: normally closed or normally open

·         Time to turn off irrigation system: 2-5 minutes for the Quick Response^TM feature

·         Time to reset the Quick Response unit: 4 hours maximum under dry sunny conditions

·         Time to reset: 3 days maximum under dry sunny conditions for the total rainfall compensation unit

·         Operating temperature: 0^oC – 54^oC (32^oF – 130^oF)

·         Vent ring allows for adjustment of reset delay

·         UV colourfast and stable

·         UL listed, FCC/DOC approved, Australia Compliance, CUL (CSA)

·         Rain sensor transmitting range: up to 90 meters line of sight

Electrical Specifications

·         Receiver Power: 22 – 28VVAC/VDC, 100mA (from timer or transformer)

·         Receiver includes built-in bypass switch, no extra switch required

·         Works with all standard controllers

It’s as easy as 1-2-3: Install bracket in easy to access location like a fence;

snap sensor in place; test system.  No wires to string.  Installs in minutes!

A Variety of Mounting Options

Whether you offer a rain-sensing device as an upgrade to your installations or you already install one as a standard piece of equipment, wouldn’t you like to have options on where you must install it?  The usual place to install a rain-sensing device has been on a flat vertical surface, such as a wall or fence.  But, with the Hunter Wireless Rain-Clik^TM, you can also mount the unit of a rain gutter.  In addition, Hunter offers a 20 cm telescoping extension rod that brings the unit our from under a roof eave or other obstruction.

Instant Shut Off When it Rains

There are a lot of rain-sensing devices on the market today, but all of them shut off an irrigation system only when a pre-set level of accumulated water is reached.  That means that even after it has started raining, a system will continue to operate, an action that can give the impression water is being wasted (not the image that a municipality wants to give its citizens as they pass by parks, roadways and other city-owned lands).  Only the Hunter Rain-Clik^TM products, with their unique Quick Response feature, allow an irrigation system to shut off immediately when it starts to rain.